Particularly flat hard foam channel support element
with sealed, floor channel drain (70 x 750 mm or
70 x 850 mm) including integrated, horizontal drain
connection fitting with odour trap. A separate, retrofittable
odour, foam and vermin barrier can be used instead of
the odour trap (TUB-BAZ STOP).
Cover rail and frame are made of stainless steel.
This product is particularly suitable where no large installation height is possible, e.g. when renovating old buildings.
|TUB-LINE COMBI RT 900|
|Dimensions||900 x 200 x 70 mm|
|Channel||70 x 750 mm|
|TUB-LINE COMBI RT 1200|
|Dimensions||1200 x 200 x 70 mm|
|Channel||70 x 850 mm|
Design cover railThe system offers two design options due to a reversible channel cover rail. One side has a brushed stainless steel surface, the other can be tiled to match the entire shower base. By simply turning, the desired side faces upwards.
Upper layer thickness (tile + adhesive) for TUB-LINE COMBI for
- the shower base = 11 mm
- the tileable stainless steel channel cover = 12 mm
A connecting element and an HTK elbow are included
with the TUB-LINE COMBI. The connecting element is
reinforced at the surface and is used for the safe covering
of the drain pipe. The HTK elbow with swivel joint included
in the delivery can be adjusted to an angle of 0 – 87°.
Connecting element with HTK elbow
Drain performance [l/s] in accordance with DIN EN 1253: 0,7 l/s
Matching gradient elements
Matching gradient elements TUB-LINE COMBI … GK are optionally available for all channel support elements TUB-LINE COMBI. They can be attached to one or both sides of the channel support.
If necessary, they can be cut to size on the higher side to adapt them e.g. to a niche.
Depending upon the routing of the pipe, the connecting element is cut to length with a cutter
After fitting the drain pipe by means of the HTK elbow, the pipe is covered safely by the connecting element
Installation is possible both on the wall side and on the room side, ...
... depending on the routing of the pipe.
TUB-LINE COMBI RT ... + connecting element + gradient element
Please note: The design of descending gradients and directions belongs to planning services.
Please note: Dimensions in mm. Measures without adhesive coating and tiles.
|Product specifications||TUB-LINE COMBI, hard foam channel support elements, with integrated and sealed floor channel drain 70 x 750 mm or 70 x 850 mm, cover rail and frame made from stainless steel, cover rail in brushed stainless steel or tileable on the rear side, with odour trap.|
|Hard foam channel support element, with floor channel drain 70 x 750 mm, including integrated horizontal drain connection fitting, including connecting element with TUB-BAZ HTK, for coverings in thicknesses from 11 mm||channel support element:
900 x 200 x 70 mm
900 x 120 x 70 mm
|LTUBE9307||TUB-LINE COMBI GK
|Hard foam descending gradient element, sealed||1200 x 900 x 70/85 mm||piece|
|Hard foam channel support element, with floor channel drain 70 x 850 mm, including integrated horizontal drain connection fitting, including connecting element with TUB-BAZ HTK, for coverings in thicknesses from 11 mm||channel support element:
1200 x 200 x 70 mm
1200 x 120 x 70 mm
|LTUBE9309||TUB-LINE COMBI GK
|Hard foam descending gradient element, sealed||1200 x 1200 x 70/85 mm||piece|
- Individual, special manufacture
LUX ELEMENTS manufactures individual customised and special products for the TUB product group. These include dimensions, thicknesses, shapes etc. that deviate from the standard program.
LUX ELEMENTS®- TUB - Brusebunde (D, GB, NL, F) (3 MB) LUX ELEMENTS®- TUB-JUNIOR (0 Byte) LUX ELEMENTS®- TUB-LINE (D, GB, NL, F) (1 MB) LUX ELEMENTS®- TUB-RD (0 Byte) LUX ELEMENTS®- TUB-RSE (0 Byte) LUX ELEMENTS®- TUB-SD (0 Byte)
- Produkt- og emballagedatoer
LUX ELEMENTS®- TUB - Accessories (50 KB) LUX ELEMENTS®- TUB - BAS 40 + 50 for 100 mm core drill hole (102 KB) LUX ELEMENTS®- TUB - BAS 50 for 160 mm core drill hole (93 KB) LUX ELEMENTS®- TUB - BAW (80 KB) LUX ELEMENTS®- TUB - BOL (131 KB) LUX ELEMENTS®- TUB - Floor drain supports and accessories (104 KB) LUX ELEMENTS®- TUB - HER/HEQ Use on wooden sub-constructions (123 KB) LUX ELEMENTS®- TUB - LINE 40 (124 KB) LUX ELEMENTS®- TUB - LINE 70 (229 KB) LUX ELEMENTS®- TUB - LINE BASE (79 KB) LUX ELEMENTS®- TUB - LINE Channel support (143 KB) LUX ELEMENTS®- TUB - LINE COMBI (122 KB) LUX ELEMENTS®- TUB - LINE Floor drain supports and accessories (114 KB) LUX ELEMENTS®- TUB - Shower base (270 KB) LUX ELEMENTS®- TUB-RSE - Space-saving corner shower (60 KB)
- The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.